With the call of the Belt and Road Initiative, the metal materials industry is booming. The company has put forward higher requirements for quality control of materials, inspection of raw materials, and inspection of ex-factory materials. Optical emission spectrometer is one of the basic testing equipments for the metal materials industry. Incoming materials inspection, quality control and factory inspection in steel, metallurgy, foundry, machining and other industries.
How to choose a suitable
optical emission spectrometer for your business?
Here we analyze from the practical application of the spectrometer user, the so-called application is based on the material material and actual function of the self-test, to do the selection analysis, mainly from the following two questions.
1. Test material
For example, if a test structure is to be tested for incoming materials, then it may involve a variety of substrates such as iron, aluminum, and copper. Users need to consider multi-matrix spectrometers. Some customers only do cast iron, so they can decisively discard aluminum, copper, etc. For material requirements, only a single substrate needs to be considered. Because the more accurate the positioning, the more accurate the positioning of the spark optical emission spectrometer, the more accurate the final selection.
2. What grades are involved in the material?
Through the analysis of materials, many companies will think that they have already applied the application requirements, and then began to compare the optical emission spectrometers of various manufacturers. In fact, this time, you need to make a thorough statistics on the factory products. What grades are involved in the material, and what is the weight of each grade, so that you can better determine which direct reading spectrometer you buy. There is no mention here. Jiebo Technology has a free material evaluation service, giving you enough selection guidance. The analysis accuracy of Jiebo T5 CMOS optical emission spectrometer fully meets the requirements of the laboratory level. The data is stable and reliable, and can be used for Fe, Al, Dozens of conventional elements of more than ten kinds of substrates such as Cu, Ni, Co, Ti, Mg, Zn, Sn, and Pb are accurately quantified.
3. Spectrometer Brands Rank
♦ Optical Emission Spectroscopy
JIEBO
♦ Optical Emission Spectroscopy Oxford
♦ Optical Emission Spectroscopy Spectro Max
♦ Optical Emission Spectroscopy Perkinelmer
